Contact

Company

Company

Innovationat at its best

Our Heritage

A Legacy of Innovation

Rooted in the ancient city of Tus, Iran, TGT’s history is deeply intertwined with the principles of efficient heat transfer. The region has a rich heritage of innovative heating systems, most notably exemplified by the ancient bathhouse built in 1615 AD. This architectural marvel showcased advanced heating techniques for its time, underlining the region’s pioneering spirit in thermal engineering.

The Mehdi Qoli Beg bathhouse, located in the historic city of Tus, Iran, is renowned for its cutting-edge underfloor heating system. Constructed in 1615 AD, this ancient bathhouse employed sophisticated heating techniques that were well ahead of its time. The bathhouse’s underfloor heating system, rooted in the principles of efficient heat transfer, is a prime example of the region’s advanced thermal engineering knowledge.

TGT’s Journey

Inspired by this historical legacy, TGT was founded in 2009 with a vision to continue this tradition of innovation. Since its inception, TGT has been at the forefront of developing advanced heat transfer solutions. Key milestones in our journey include:

Get to know Plate Heat Exchanger

First PHE in Mid-east

As the first company in Iran and the Middle East to manufacture heat exchangers in 2001, TGT has been at the forefront of thermal technology. Our commitment to innovation has driven us to develop cutting-edge solutions for a wide range of industries.

First PHE Design in Mid-east

TGT holds the distinction of being the first company in Iran and the Middle East to patent wide-plate heat exchanger design and manufacturing. This groundbreaking technology has set new standards in efficiency and performance.

First 2500 ton hot hydraulic press

In 2015, TGT made history by introducing a 2500-ton press, the first of its kind in the Middle East. This state-of-the-art equipment allows us to produce high-quality heat exchangers with unmatched precision and efficiency.

350 Types of plates

With an extensive range of over 350 types of heat exchanger plates, TGT offers customized solutions to meet the unique requirements of every industry. Our commitment to product diversity ensures that you find the perfect heat exchanger for your application.

Brief History

Why TGT in heat transfers ?

Mission

From start to finish, TGT guarantees the quality of every single part, produced in-house.

Vision

TGT is the Middle East’s leading manufacturer of PHEs, setting new standards in both production volume and technology.

Value

Quality: We are committed to delivering products and services of the highest quality.

Customer Satisfaction: We strive to exceed customer expectations through exceptional service.

.

Innovation: We continuously push the boundaries of technology to develop innovative solutions. 

Sustainability: We are dedicated to minimizing our environmental impact and promoting sustainable practices.

Value

Quality

We are committed to delivering products and 

Innovation

We continuously push the boundaries of technology to develop innovative solutions. 

Customer Satisfaction

We strive to exceed customer expectations through exceptional service.

Sustainability

We are dedicated to minimizing our environmental impact and promoting sustainable practices.

Expertise

Knowledge-Based Company:

Trusted company with an experienced, academic, and expert management

TGT Co. was recognized as the only knowledge-based company in the designing and manufacturing of plate heat exchangers in 2013 with the approval of special government professional groups. TGT Co is the only manufacturing company that designs and manufactures all types of plate heat exchangers in the Middle East region. We have designed and manufactured more than 15 types of knowledge-based products in recent years.

25

Faculty Member

90

Academic Staff

10

National Standards

53

Conferences

View More

10

Published Books

View More

104

Scientific Paper

View More

16

Patents

View More

8

Internationall Universities Collaboration

Innovative Solutions:

...

At TGT, innovation is more than just a buzzword; it’s the driving force behind everything we do. Our commitment to research and development is unwavering, as we continually strive to push the boundaries of heat transfer technology. This dedication has led to the development of a wide range of innovative products, from highly efficient plate heat exchangers to specialized pumps and valves. By investing in cutting-edge research and fostering a culture of creativity, TGT is able to anticipate and address the evolving needs of our customers.

25.000 ton Press

Design and manufacturing of large PHEs with high heat transfer capacity and large flowing volumes requires forming of large sheet metals more than 4.5 meters in length. We are the only company in the Middle East capable of producing such large PHE units with the largest and most unique hydraulic press in the region having a tonnage of 25,000 tons. This press can form five sheets simultaneously. In addition, TGT Co. has a wide range of other high-tonnage presses to form PHE sheets.

Capabilities

Special Industrial equipments.

6

Laser welding and cladding equipment

20

Special laboratory equipment

35

Machining equipment

10

Hot high-tonnage hydraulic presses

8

High-tonnage hydraulic presses

20

CNC machines

140

Special manufacturing equipment

6

Laser welding and cladding equipment

20

Special laboratory equipment

35

Machining equipment

10

Hot high-tonnage hydraulic presses

8

High-tonnage hydraulic presses

20

CNC machines

140

Special manufacturing equipment

TGT Sites

Center of Innovative Technologies (CIT)

Plate heat exchanger production and assembly Site

R&D - separation projects Site

Gasket compounding and production factory

Headquarter and engineering office

Administrative and sales office

Services and repair Center

Painting and cutting Site

Research and development hub for academia and industry

laboratory

Heat exchanger performance laboratory

Explore more

Heat exchanger performance laboratory



During the designing and manufacturing of a plate heat exchanger, after numerical analysis and designing a new product (new design of plates and gasket), a prototype is manufactured and the performance is tested under actual operating conditions. TGT has established a one-of-a-kind industrial research-based laboratory for testing the performance and energy efficiency of heat exchangers. TGT’s heat exchanger laboratory is the only heat exchanger performance laboratory in the country to be certified with ISO 17025.

Polymer and rubber laboratory

Explore more

Polymer and rubber laboratory

TGT’s specialized polymer and rubber laboratory is established to control the quality parameters and also expand the variety of polymer products in the oil, gas, and petrochemical industries. This laboratory has gained the ISO 17025 certificate by taking advantage of faculty members, expert engineers, and advanced testing devices based on national and international standards including the most practical tests of the polymer and rubber industries. The laboratory has special equipment to determine the life of PHE gaskets in order to improve their lifetime.

Metallography and non-destructive testing laboratory

Explore more

Metallography and non-destructive testing laboratory

Different types of manufacturing processes like machining, welding, cladding required metallography and microscopic examining to achieve the desired properties of alloys and metals such as toughness, hardness, and tensile strength. To ensure the quality of manufactured parts, non-destructive testing is inevitable. For this purpose, the metallography and non-destructive testing (NDT) laboratory has been equipped and can perform different metallography and non-destructive testing services. This laboratory has also received the ISO 17025 certificate because of its specialized expertise and equipment.

Software Solutions

TIP ® Taha Intelligence Platform

Real-time process monitoring and analysis of PHEs

TGT SheetCut ®

Optimized sheet cutting for minimal waste

TGT ProjectTrack ®

Comprehensive project management and document tracking

TGT DocAuto ®

Automated documentation for enhanced efficiency

TGT PHE-Design Software ®

Tailored plate heat exchanger design for optimal performance

Taha - SEP ®

Advanced flow simulation for mist eliminators

Standards and Certifications

ISO 45001

ISO 9001

ISO 14001

CE4212

Sustainability

Innovating for a Greener Tomorrow

TGT is at the forefront of developing innovative solutions that address global environmental challenges. By leveraging cutting-edge technology and sustainable materials, we are able to create products that are both efficient and environmentally friendly. Our commitment to research and development ensures that we are continually exploring new ways to reduce our carbon footprint and promote sustainability

The Brains Behind

Dr. Anooshiravan Farshidianfar

Chief Executive Officer (CEO), Professor of Mechanical Engineering at Ferdowsi University of Mashhad.

Kooresh Farshidianfar

Chief Marketing Officer (CMO) Member of The Board

Alireza Ghasemi

Chairman of The Board (COB) Chief Financial Officer (CFO)

Hossein Khatibi

Chief Operating Officer (COO) Member of The Board

Dr. Alireza Farshidianfar

Chief Manufacturing Officer Member of The Board

Dr. Ardeshir Farshidianfar (1962-2020)

Dr. Farshidianfar was the co-founder, board member and chief technology officer (CTO) of TGT co. from 2000 to 2020. He pioneered the design and manufacturing of plate heat exchangers in Iran. He was awarded the entrepreneur and engineer of the year of the year award in 2013. The results of Dr. Farshidianfar’s insightful work have been published in 14 books, numerous journal papers and conference proceedings.

NEWS

Catalogues

TGT General Catalogue 2025

Download

TGT Products Catalogue

Download

TGT CIT Catalogue

Download
Youtube Linkedin Instagram Telegram

Company

  • History
  • Values
  • Vision
  • Senior Management
  • Career Opportunities
  • Catalogs
  • Media
  • Assets
  • Social Media
  • Achievements and Certifications
  • Scientific News

Contact Us

Plate Heat Exchanger

Heat Transfer

Separation

Rotary Equipment

Pelletizing

Blog

Service & Solutions

Industries

Careers

Internship

News

Copyright © 2025 TGT LLC All rights reserved.

Privacy Policy | Terms of Use | Sales and Refunds | Legal | Site Map

Conferences

  1. Farshidianfar, A., Ebrahimi, M, Bartlett, H, Moavenian, M., “Manufacturing Parameter Variation in Automotive Driveline”, Advanced Manufacturing Processes, System and Technologies International Conference, MEP Publication, Bradford University, Bradford, UK,
    pp. 143-152, 1999.
  2. Farshidianfar, A., Ebrahimi, M., Rahnejat, H. and Menday, M.T., , “Low-frequency torsional vibration of vehicular driveline systems in shuffle”, in Multi-body Dynamics: Monitoring and Simulation Techniques- II, H. Rahnejat et al. (Eds.), PEP Publications (IMechE), Bradford University, Bradford, UK, , pp. 269-282, June 2000.
  3. Farshidanfar, A., Ebrahimi, M., Bartlett , H., Moavenian , M., “Torsional Vibration of Vehicular Driveline (Application to Shuffle)”, 4th International and 8th Annual Mechanical Engineering Conference (ISME2000), pp. 121-131, May 2000.
  4. Farshidianfar, A., Ebrahimi, M., “Optimization of vehicle driveline vibrations using genetic algorithm (GA)”, the SAE Noise & Vibration Conference & Exposition, Traverse City, MI, USA, April 30 – May 3, 2001.
  5. Farshidanfar, A., Ebrahimi, M., “Frequency response of torsional vibration using distributed-lumped modeling technique”, 5th International and 9th Annual Mechanical Engineering Conference (ISME2002), Tehran, pp. 16-21, May 2002.
  6. Farshidanfar, A., Mazaheri, O. “Prediction of driveshaft resonant frequencies using the Transfer Matrix Method”, 7th International and 11th Annual Mechanical Engineering Conference, ISME (2003), Ferdowsi University of Mashhad, pp. 465-473, May 2003.
  7. Farshidanfar, A., Poorkhadem, N. H., “3D Topology Optimization using Evolutionary Structural Optimization (ESO)”, 19th Canadian Congress of Applied Mechanics, CANCAM 2003, The University of Calgary, Calgary, Alberta, Canada, June 01-05, 2003.
  8. Abdul-Ameer A. A., Farshidianfar, A., Ebrahimi, M., “Modelling and simulation of turning process”, Laser Metrology and Machine Performance VI (LAMDAMAP-2003), The University of Huddersfield, England, pp. 171-180, July 2003.
  9. Dalir, H., Farshidanfar, A., “ FLEXURAL VIBRATION OF ROTATING SHAFTS BY
    FREQUENCY DOMAIN HYBRID MODELLING”, 8th International and 12th Annual Mechanical Engineering Conference, ISME (2004), Tarbiat Modarres University, Tehran, pp. 54, May 2004.
  10. Farshidanfar, A., Farshidianfar, K., “ PREDICTION OF DRIVESHAFT RESONANT FREQUENCIES USING THE TRANSFER MATRIX METHOD”, 11th International a
    Congress & Exhibition on Sound and Vibration (ICSV11), St. Petersburg, Russia, pp. 20, 5-8 July 2004.
  11. Farshidianfar, A., Khosrownejad, M., Jafarnejad, M., “Fuzzy distributed-lumped modeling with application on uncertain dynamic analysis of a power transmission system”, 5th Iranian Conference on Fuzzy Systems (ICFS2004), Tehran, pp. 90-100, September 2004.
  12. Dalir, H., Farshidanfar, A., Shayan Amin, S. “ Frequency Response of Longitudinal Vibration Using Distributed-Lumped Modelling Technique”, International Mechanical Engineering Conference, IMEC2004, Kuwait, pp. 837-848, December 2004.
  13. Farshidanfar, A., Abbasion, S., Rafsanjani, A., “Prediction of Optimum Punch-Die Clearance”, Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, December 12-15, 2005.
  14. Dalir, H., Akbari, J., Farshidanfar, A., Hatsuzawa, T. “ EFFECTS OF AXIAL LOAD ON WAVE PROPAGATION IN DOUBLE-WALLED CARBON NANOTUBES USED AS A
    FLEXIBLE TIP IN AFM”, 20th ASME Biennial Conference on Mechanical Vibration and Noise, DETC 2005-84549, Long Beach, CA, USA, September 24-28, 2005.
  15. Farshidanfar, A., Esfahani, R., “HYBRID MODELING FOR FLEXTURAL VIBRATION
    OF ROTATING SHAFT”, Paper No.02-038., International Conference on Modeling and Simulation, MS2006, Kuala Lumpur, Malaysia, 30-31, May 2006.
  16. Farshidanfar, A., Rafsanjani, A., Abbasion., S., “PREDICTION OF OPTIMUM PUNCH- DIE CLEARANCE BY MINIMIZING THE BURR HEIGHT”, Paper No. 109, International
    Conference on Modeling and Simulation, MS2006, Kuala Lumpur, Malaysia, 30-31 May 2006.
  17. Mahdavi, M. H., Farshidianfar, A., Dalir, H., Shayan amin, S., “HIGH FREQUENCY ANALYSIS OF A NON-CONTACT ATOMIC FORCE MICROSCOPY
    MICROCANTILEVER”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 77, May 2006.
  18. Esfahani, R., Farshidianfar, A., “Distributed-lumped analysis for bending critical speeds”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 69, May 2006.
  19. Dalir, H., Farshidianfar, A., Shayan amin, S., Mahdavi, M. H., “AN APPROACH TO THE ELASTIC COLUMN BUCKLING WITH ALLOWANCE FOR SHEAR DEFORMATION
    AND ROTARY INERTIA”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 67, May 2006.
  20. Soheili, S., Farshidianfar, A., “FLEXURAL VIBRATION OF ROTATING SHAFTS
    USING HYBRID MODELING”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 75, May 2006.
  21. Abbasion., S., Farshidianfar, A., N. Irani, Bashari, M., “A Practical Method for Multi-Fault Diagnosis of Rolling Element Bearings using Discrete Wavelet Transform and Support Vector Machine”, International Mechanical Engineering Congress and Exposition, Proceedings of IMECE2006, November 5-10, 2006, Chicago, Illinois, USA.
  22. Rafsanjani, A., Abbasion., S., Farshidianfar, A., N. Irani, ” Prediction of Ductile Damage in Sheet Metal Blanking Process Including the Thermo Mechanical Coupling “, International Mechanical Engineering Congress and Exposition, Proceedings of IMECE2006, November 5- 10, 2006, Chicago, Illinois, USA.
  23. Mahdavi, M. H., Farshidianfar, A., Dalir, H., Tahani, M., “FREQUENCY ANALYSIS OF ATOMIC FORCE MICROSCOPY CANTILEVERS IN A DYNAMIC MODE CONSIDERING TIP MASS AND MOMENT OF INERTIA”, The 3rd International
    Congress of Nanotechnology (ICNT 2006), October 30- November 2, 2006, San Francisco, USA.
  24. Shayan amin, S.,, Farshidianfar, A., Dalir, H., “TIMOSHENKO FREQUENCY ANALYSIS OF CARBON NANOTUBES USING AS FIBERS IN COMPOSITE MATERIALS “, The
    3rd International Congress of Nanotechnology (ICNT 2006), October 30- November 2, 2006, San Francisco, USA.
  25. Rafsanjani, A., Moeenfard, H., Farshidianfar, A., Abbasion., S., “Investigation the effect of internal radial clearance on the nonlinear dynamic response of a balanced rotor supported by deep groove ball bearings”, 15th. Annual (International) Conference on Mechanical Engineering-ISME2007, Amirkabir University of Technology, Tehran, Iran, ISME2007-1013,
    pp. 99-100, May 15-17, 2007.
  26. Farshidianfar, A., Abbasion, S., Rafsanjani, A., “Prediction of Ductile Fracture in Sheet Metal Blanking Process Including Thermal Effects”, Tehran International Congress on Manufacturing Engineering (TICME2007), Tehran, Iran, December 10-13, 2007.
  27. Farshidianfar, A., M.S. Gholami., and P. Naeemi, “Vibration control in machine tools using time delay resonator absorber “, Tehran International Congress on Manufacturing Engineering (TICME2007), Tehran, Iran, December 10-13, 2007.
  28. Farshidianfar, A., Rafsanjani, A., Abbasion., S., Moeenfard, H.., “Dynamic Modeling of Chaotic Response of Bearing Systems due to Surface Defects”,16th. Annual (International) Conference on Mechanical Engineering-ISME2008, Shahid Bahonar University of Kerman, Iran,pp. 285-286, May 14-16, 2008.
  29. Tahani, M., Soheili S., Abachizadeh M., Farshidianfar, A., “Rotors Frequency and Time Response of Torsional Vibration Using Hybrid Modeling”,16th. Annual (International) Conference on Mechanical Engineering-ISME2008, Shahid Bahonar University of Kerman, Iran, pp. 321-322, May 14-16, 2008.
  30. Farshidianfar, A., Nickmehr N., ” THE INCREMENTAL HARMINIC BALANCE METHOD FOR NONLINEAR VIBRATION OF AN IMPACT OSCILLATOR”, 15th
    International Congress on Sound and Vibration, ICSV15, Daejeon, Korea, pp. 88, July 6-10, 2008.
  31. Farshidianfar, A., Maleki, V., ” NONLINEAR MODELING OF HYDRAULIC ENGINE MOUNTS USING COUPLED MOMENTUM EQUATIONS OF DECOUPLER AND
    INERTIA TRACK “, 15th International Congress on Sound and Vibration, ICSV15, Daejeon, Korea, pp. 162, July 6-10, 2008.
  32. Farshidianfar, A., Nickmehr, N., “The incremental harmonic balance method for nonlinear vibration of autonomous self-excited oscillators with impact dampers “, the 37th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2008, Shanghai, China, pp. 183, 26-29 October, 2008.
  33. Farshidianfar, A., Pouria Oliazadeh, Hamid Reza Farivar,”Optimal Parameter’s Design in Tuned Liquid Column Damper”, 17th. Annual (International) Conference on Mechanical Engineering-ISME2009, University of Tehran, Iran, pp. 171-172, May 19-21, 2009.
  34. Farshidianfar, A., Zanganeh, H., ” Prediction of lock-in range by spectral analysis, and analytical verification of the griffin plot “, 16th International Congress on Sound and Vibration, ICSV16, Krakow, Poland, pp. 85, July 5-9, 2009.
  35. Abolbashari, M., Farshidianfar, A., Soheili, S., “Flexural Vibration of Propeller Shafts Using Distributed Lumped Modeling Technique “, 16th International Congress on Sound and Vibration, ICSV16, Krakow, Poland, pp. 99, July 5-9, 2009.
  36. Soltani, P., Saadati, M. R., Farshidianfar, A., “Application of Generalized Quadrature Rule to Vibration of a Curved Carbon Nanotube on Elastic Foundation”, 16th International Congress on Sound and Vibration, ICSV16, Krakow, Poland, pp. 108, July 5-9, 2009.
  37. Soltani, P., Bahar, P., Farshidianfar, A., “Vibration of Short Carbon Nanotubes Using Generalized Differential Quadrature Rule “, 16th International Congress on Sound and Vibration, ICSV16, Krakow, Poland, pp. 136, July 5-9, 2009.
  38. Nosrati, A., Farshidianfar, A., “Analytical Approximations for Stick-Slip Vibration Amplitudes Based on a Discretization Method “, 16th International Congress on Sound and Vibration, ICSV16, Krakow, Poland, pp. 164, July 5-9, 2009.
  39. Farshidianfar, A., Hoseinzadeh, M. H., Raghebi, M., “Damage Detection of an Overhang Cracked Shaft by Frequency Analysis “, 16th International Congress on Sound and Vibration, ICSV16, Krakow, Poland, pp. 57, July 5-9, 2009.
  40. Farshidianfar, A., Oliazadeh, P., ” Closed form optimal solution of a tuned liquid column damper responding to earthquake “, World Academy of Science, Engineering and Technology 59, WCSET 2009, ISSN 2070-3740, Bali, Indonesia, pp. 159-164, November 25-27, 2009.
  41. Payam Soltani, Mohammad Reza Saadati, Anooshiravan Farshidianfar, ” In-plane Vibrational Analysis of the Circularly Curved Carbon Nanotubes in Pasternak-Winkler Type Foundation”, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, pp. 1-6, May 11-13, 2010.
  42. Payam Soltani, Hadi Ahmadi Dastjerdi, Anooshiravan Farshidianfar, ” Thermo-mechanical Vibration of a Single-walled Carbon Nanotube Embedded in a Pasternak Medium Based on Nonlocal Elasticity Theory “, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, pp. 1-5, May 11-13, 2010.
  43. Saeed Soheili, Mahdi Abachizadeh, Anooshiravan Farshidianfar, ” Tuned Mass Dampers for Earthquake Oscillations of High-rise Structures Using Ant Colony Optimization Technique “, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, pp. 1-6, May 11-13, 2010.
  44. Farshidianfar, A., Oliazadeh, P., ” Vibration Control of Super Tall Buildings by Tuned Liquid column damper “, World Academy of Science, 17th International Congress on Sound and Vibration, ICSV17, Cairo, Egypt, pp. 1-8, July 18-22, 2010.
  45. Anooshiravan Farshidianfar, Saeed Soheili, “Tuned Liquid Column Dampers with Period Adjustment Equipment for Earthquake Vibrations of High-rise Structures “, 6th National Congress on Civil Engineering, 6NCCE, Semnan University, Semnan, Iran, pp. 1-8, April 26- 27, 2011.
  46. Anooshiravan Farshidianfar, Saeed Soheili, “Bee Colony Optimization of Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings Including Soil Structure Interaction “, 6th National Congress on Civil Engineering, 6NCCE, Semnan University, Semnan, Iran, pp. 1-8, April 26-27, 2011.
  47. Anooshiravan Farshidianfar, Ali A. Ghassabi, Mohammad H. Farshidianfar, and Mohammad Hoseinzadeh, ” VIBRATION ANALYSIS OF DRUG DELIVERY CNTS USING
    TRANSFER MATRIX METHOD “, Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2011, Edmonton, Alberta, CANADA, pp. 1-8, June 19-22, 2011.
  48. Anooshiravan Farshidianfar, Mohammad H. Farshidianfar, ” Free Vibration of Thin- Walled Cylindrical Shells “, 19th Annual International Conference on Mechanical Engineering- ISME2011, The University of Birjand, Birjand, Iran, pp. 1-4, May 10-12, 2011.
  49. Anooshiravan Farshidianfar, Saeed Soheili, ” Tuned Liquid Column Dampers for Earthquake Oscillations of High-rise Structures Including Soil-Structure Interaction”, 19th Annual International Conference on Mechanical Engineering-ISME2011, The University of Birjand, Birjand, Iran, pp. 1-4, May 10-12, 2011.
  50.  Omid Jahanian, Anooshiravan Farshidianfar, Ghasem Karimi, ” An Investigation on Ground Reaction Force During Biped Normal Walking “, 19th Annual International Conference on Mechanical Engineering-ISME2011, The University of Birjand, Birjand, Iran,
    pp. 1-4, May 10-12, 2011.
  51. Hamid Moeenfard, Mohammad Taghi Ahmadian, Anooshiravan Farshidianfar,
    “ANALYTICAL MODELING OF SQUEEZE FILM DAMPING IN MICROMIRRORS”,
    ASME International Design Engineering Technical Conference, DETC2011-47125, Washington DC, USA, pp. 1-7, August 28-31, 2011.
  52. Anooshiravan Farshidianfar, Ali. A. Ghassabi, Mohammad. H. Farshidianfar, “Transverse vibration of fluid conveying carbon nanotubes embedded in two-parameter elastic medium “, 18th International Congress on Sound and Vibration, ICSV18, Rio de Janeiro, Brazil, pp. 1-8, 10-14 July 2011.
  53. Payam Soltani, Amir Kassaei, Mohammad M. Taherian, Anooshiravan Farshidianfar, “VIBRATION ANALYSIS OF CURVED SINGLE-WALLED CARBON NANOTUBES EMBEDDED IN AN ELASTIC MEDIUM BASED ON NONLOCAL ELASTICITY “, 18th
    International Congress on Sound and Vibration, ICSV18, Rio de Janeiro, Brazil, pp. 1-8, 10-14 July 2011.
  54. Payam Soltani, Roja Bahramian, Javad Saberian, Anooshiravan Farshidianfar, “FREE VIBRATION OF AN EMBEDDED FLUID-FILLED SINGLE WALLED CARBON NANOTUBE UNDER AXIAL LOAD USING SHELL CONTINUUM MODEL “, 18th
    International Congress on Sound and Vibration, ICSV18, Rio de Janeiro, Brazil, pp. 1-8, 10-14 July 2011.
  55. Farzaneh Samadi, Anooshiravan Farshidianfar, “Free vibration of carbon nanotubes conveying viscous fluid using nonlocal Timoshenko beam model “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-7, 21-22 Dec. 2011.
  56. Farzaneh Samadi, Anooshiravan Farshidianfar, ” Vibration and instability analysis of viscoelastic single- walled carbon nanotubes conveying viscous fluid embedded in a viscoelastic medium “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  57. Aref Afsharfard, Anooshiravan Farshidianfar, ” Design of Nonlinear Impact Dampers Based on Acoustic Behavior “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  58. Anooshiravan Farshidianfar, Nader Dolatabadi, Yousef Naranjani, “Consideration of Lock- in Using a Modified Wake Oscillator in Vortex Induced Vibrations about a Cylinder “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  59. Anooshiravan Farshidianfar, Mehrdad Noei Aghaee, “Analytical Approaches for Friction Induced Vibration and Stability Analysis “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  60. Anooshiravan Farshidianfar, Ali. A. Ghassabi, Fatemeh. Tavakolian, ” The Thermal Effect on Pull-in Instability of Electrostatically Actuated Nanoswitches”, Proceedings of the 4th International Conference on Nanostructures (ICNS4), Kish Island, I.R. Iran pp. 1-3, 12-14 March, 2012.
  61. Anooshiravan Farshidianfar, Farzaneh Samadi, ” Vibration analysis of nanofluid- conveying carbon nanotubes embedded in Pasternak-Winkler type elastic foundation with consideration of surface effects”, 19th International Congress on Sound and Vibration, ICSV19, Vilnius, Lithuania, pp. 1-8, 8-12 July 2012.
  62. Anooshiravan Farshidianfar, Farzaneh Samadi, ” A microstructure-dependent Timoshenko beam model for vibration analysis of micropipes conveying fluid based on strain gradient theory “, 19th International Congress on Sound and Vibration, ICSV19, Vilnius, Lithuania, pp. 1-8, 8-12 July 2012.
  63. Anooshiravan Farshidianfar, Farzaneh Samadi, ” Thermal Vibration of Nanobeams Based on Exact Non-local Stress Theory “, 2nd International Conference on Acoustics & Vibration (ISAV2012), Sharif University of Technology, Tehran, Iran, pp. 1-6, 26-27 Dec. 2012.
  64. Anooshiravan Farshidianfar, Farzaneh Samadi, ” Vibration and Stability Analysis of Micropipes Conveying Fluid Based on Strain Gradient Theory with Surface Energy”, 2nd International Conference on Acoustics & Vibration (ISAV2012), Sharif University of Technology, Tehran, Iran, pp. 1-8, 26-27 Dec. 2012.
  65. Anooshiravan Farshidianfar, Amin Saghafi, “Bifurcation and chaos in nonlinear gear vibration system”, 2nd International Conference on Acoustics & Vibration (ISAV2012), Sharif University of Technology, Tehran, Iran, pp. 1-6, 26-27 Dec. 2012.
  66. B. Noori, A. Farshidianfar, ” H-infinity optimization of a dynamic vibration absorber for suppressing vibration in beams “, 12th Iranian Aerospace Society Conference (AERO2013- 18032), Amir Kabir University of Technology, Tehran, Iran, pp. 1-4, 19-21, Feb. 2013.
  67. B. Noori, A. Farshidianfar, ” Optimization of a variant design of dynamic vibration absorber for suppressing random vibration in beams “, 21st Annual International Conference on Mechanical Engineering-ISME2013, School of Mechanical Eng., K.N.Toosi University, Tehran, Iran, pp. 1-5, May 7-9, 2013.
  68. S. F. Nabavi, A. Farshidianfar, and A. Afsharfard, “Different types of theoretical methods for small beam-column mass guided energy harvesting system,” The 8th international Conference on Acoustics and Vibration, Tehran, 2018.
  69. S. Marandi, S. F. Nabavi, M. H. Farshidianfar, A. Farshidianfar, J. Jahanpour, B. Beidokhti, M. Shojaati, “Experimental analysis of the physical parameter effect on the clad thickness of Steam Blade Turbine in laser cladding process,” The 17th National & 6th International Conference of Manufacturing Engineering, Tehran, 2021.
  70. R. Esmaili, S. F. Nabavi, M. H. Farshidianfar, A. Farshidianfar, “Effect of Wobble Mode on Geometric and Metallurgical Characteristics of Edge Joint on Laser Wobble Welding Process” 22th National Conference on Surface Engineering & 6th Conference on Laser Material Processing, 2022, Accepted as Poster.
  71. S. F. Eshraghi, S. F. Nabavi, M. H. Farshidianfar, and A. Farshidianfar, “Aluminum to copper dissimilar laser joint using stainless steel 316L bimetal,” The 30th Annual International Conference of Iranian Society of Mechanical Engineers, 10-20 May, 2022, Tehran, Iran.

Books

Books (in English)

1. A. Farshidianfar and S. F. Nabavi, and M. H. Farshidianfar “The Laser Manufacturing Process: Fundamentals of Process and Applications”, CRC Press, Taylor and Francis Group, 2025.

Books (in Persian)

1. A. Farshidianfar, “Advanced Strength and Applied Elasticity”, Ferdowsi University of Mashhad Press, Publication No. 204, Mashhad, Iran, 1996.

2. A. Farshidianfar, H. Dalir, “An Engineering’s Guide to: MATLAB 6.5 and SIMULINK With Applications”, Naghoos Press, Tehran, Iran, 2004.

3. Ardeshir Farshidianfar, Anooshirvan Farshidianfar, A. Fanudi, “Modern Air Conditioning”, Ostad Press, Mashhad, Iran, 2004.

4. Ardeshir Farshidianfar, Anooshirvan Farshidianfar, “Modern Air Conditioning, Fundamental Design of Plate Heat Exchanger”, Second Edition, Ostad Press, Mashhad, Iran, 2008.

5. A. Farshidianfar, H. Dalir, S. Shayan, “Synthesis, Mechanical Properties and Application of Carbon Nanotubes”, Ferdowsi University Press, Publication No. 513, Mashhad, Iran, 2008.

6. A. Farshidianfar, N. Nickmehr, “Mechanical Vibration – Volume 1”, Ferdowsi University of Mashhad Press, Publication No. 543, Mashhad, Iran, 2009.

7. A. Farshidianfar, N. Nickmehr, “Mechanical Vibration – Volume 2”, Ferdowsi University of Mashhad Press, Publication No. 549, Mashhad, Iran, 2010.

8. Anooshirvan Farshidianfar, Hadi Kalani, Nader Dolatabadi, “Simulink Application in Engineering”, Kian Rayneh Sabt Publishing Company, 2012.

9. Anooshirvan Farshidianfar, Ardeshir Farshidianfar, “Plate Heat Exchangers, Design, Application and Performance”, Nama Publishing Company, 2013.

10. Ardeshir Farshidianfar, Anooshirvan Farshidianfar, “Energy Optimization using Plate Heat Exchanger (PHE)”, Khaneh Pajohesh Publishing Company, 2015.

11. Anooshirvan Farshidinafar, Seyedeh Fatemeh Nabavi, “The Heaven of Vibration”, Partoo Negar Toos, 2019.

12. S. F. Nabavi, A. Farshidianfar, and M. H. Farshidianfar, “The Universe of Laser in Industries”, Parto Negar Toos, 2022.

Research Papers

Journal Papers

  1. Farshidianfar, A., Ebrahimi, M., Bartlett, H., “Hybrid modelling and simulation of the torsional vibration of vehicle driveline systems”, Proc. Instn. Mech. Engrs., Part D, Journal of Automobile Engineering, Vol. 215, pp. 217-229., 2001.
  2. Farshidanfar, A., Ebrahimi, M., Bartlett , H., Moavenian , M., “Driveline shuffle in rear wheel vehicles “, Heavy Vehicle Systems, A series of the Int . Journal of Vehicle Desigh, Vol. 9,No. 1, pp. 76-91, 2002.,
  3. Farshidianfar, A. , Ebrahimi, M., Rahnejat, H., Menday, T. M., Moavenian, M., “Optimization of high frequency Torsional Vibration of vehicle driveline systems using Genetic Algorithms”, Proc. Instn. Mech. Engrs, Part k, Journal of Multi–body Dynamics, Vol. 217, pp. 249-262, 2002.
  4. Farshidianfar, A., Ebrahimi, M., Rahnejat, H., and Menday, M. T., “High frequncy torsional vibration of vehicular driveline systems in clonk” Heavy Vehicle Systems, A Series on the Int. Journal of Vehicle, Design, Vol. 9, No.2, pp. 127-149, 2002.
  5. S. Abbasion, A. Rafsanjani, A. Farshidianfar, N. Irani, “Rolling element bearings multi-fault classification based on the wavelet denoising and support vector machine”, Mechanical Systems and Signal Processing, 21, pp. 2933-2945, 2007.
  6. Farshidianfar, A., Moeenfard, H.., Rafsanjani, A., “Frequency Response Calculation of Nonlinear Torsional Vibration in Gear Systems” , Proc. Instn. Mech. Engrs, Part k, Journal of Multi–body Dynamics, JMBD108, Vol. 222, pp. 49-60, 2008.
  1. A. Farshidianfar, S. Soheili, M. Abachizadeh,” Flexural Vibration of Timoshenko Beams, Using Distributed Lumped Modeling Technique“, Mechanical and Aerospace Engineering Journal, Vol. 4, No. 1, pp. 75-84, Spring 2008.
  2. M. H. Mahdavi, A. Farshidianfar, M.Tahani S. Mahdavi, Hamid Dalir, “A more comprehensive modeling of atomic force microscope cantilever”, Ultramicroscopy, 109, pp., 54–60, 2008.
  3. A. Rafsanjani, S. Abbasion, A., Farshidianfar, H., Moeenfard, ” Nonlinear dynamic modeling of surface defects in rolling element bearing system “, Journal of Sound and Vibration (JSV), Vol. 319, pp 1150–1174, 2009.
  4. A. Farshidianfar and S. Soheili, “Effects of rotary inertia and gyroscopic momentum on the flexural vibration of rotating shafts using hybrid modeling”, Scientia Iranica, Transaction B: Mechanical Engineering, Vol. 16 , No.1, pp. 75-86, Feb. 2009.
  5. Sara Shayan Amin, Hamid Dalir, Anooshirvan Farshidianfar, “Carbon nanotube-reinforced composites: frequency analysis theories based on the matrix stiffness“, Computational Mechanics, Vol. 43, No. 4, pp. 515-524, March 2009.
  6. Saeed Abbasion; Ahmad Rafsanjani, Nilgoon Irani, Anoshiravan Farshidianfar, “Stress Analysis for a Coated Fiber Embedded in an Infinite Matrix Subjected to Body Force“, European Journal of Mechanics – A/Solids 28, pp. 777-785, 2009.
  7. Sara Shayan Amin, Hamid Dalir, Anooshirvan Farshidianfar, ” MOLECULAR DYNAMICS SIMULATION OF DOUBLE-WALLED CARBON NANOTUBE VIBRATIONS: COMPARISON WITH CONTINUUM ELASTIC THERORIES“, Journal of Mechanics, Vol. 25, No. 4, pp. 279-285, December 2009.
  1. Anoshiravan Farshidianfar and Neda Nickmehr, “Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity”, Iranian Journal of Mechanical Engineering, Transactions of the ISME, Vol. 10 , No.1, pp. 37-54, March 2009.
  2. Ahmad Rafsanjani, Saeed Abbasion, Anoshiravan Farshidianfar, Nilgoon Irani, “Investigation of the viscous and thermal effects on ductile fracture in sheet metal blanking process “, International Journal of Advanced Manufacturing Technology, 45, pp. 459-469, 2009.
  3. Saeed Abbasion; Ahmad Rafsanjani, Reza Avazmohammadi, Anoshiravan Farshidianfar, “Free Vibration of Micro-scaled Timoshenko beams“, APPLIED PHYSICS LETTERS, 95, 143122, pp. 1-3, 2009.
  4. A. Farshidianfar and H. Zanganeh, “The Lock-in Phenomenon in VIV Using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio”, Iranian Journal of Mechanical Engineering, Transactions of the ISME, Vol. 10 , No.2, pp. 5-30, Sep. 2009.
  5. R. Esfahani, Anoshiravan Farshidianfar, A. Shahrjerdi, F. Mustapha, “Longitudinal Vibrations Analysis of Vehicular Clutch“, Australian Journal of Basic and Applied Sciences, 3(4): 3633-3641, INSInet Publication, 2009.
  6. Raghebi, M., Farshidianfar, A., “Comments on Detection of multiple cracks using frequency measurements and suggestion for improvement in solution for damage parameters “, Engineering Fracture Mechanics, Vol. 77, Issue 8, 1375-1377, May 2010.
  7. Farshidianfar, A. and Zanganeh, H. “A modified wake oscillator model for vortex-induced vibration of circular cylinders for a wide range of mass-damping ratio”, Journal of Fluids and Structures, Vol. 26, No. 3, pp. 430-441, April 2010.
  8. P. Soltani; M. M. Taherian, A. Farshidianfar, “Vibration and instability of a viscous-fluid- conveying single-walled carbon nanotube embedded in a visco-elastic medium“, JOURNAL OF PHYSICS D: APPLIED PHYSICS, Vol. 43, No. 42, 425401, pp. 1-8, 2010.
  9. Anooshiravan Farshidianfar, Mohammad H. Farshidianfar, Malcolm J. Crocker, Wesley O. Smith ” Vibration Analysis of Long Cylindrical Shells Using Acoustical Excitation “, Journal of Sound and Vibration (JSV), Vol. 330, Issue 14, pp 3381-3399, July 2011.
  10. H. R. Ghaffarianjam, M.H. Abolbashari, and A. Farshidianfar, “Quantitative Verification of the Morphing Evolutionary Structural Optimization Method for Some Benchmark Problems Using a New Performance Index”, Scientia Iranica, Transaction B: Mechanical Engineering, Vol. 16 , No.1, pp. 75-86, Feb. 2011.
  1. I. MEHDIPOUR, P. SOLTANI, D. D. GANJI, A. FARSHIDIANFAR, “NONLINEAR VIBRATION  AND  BENDING  INSTABILITY  OF  A  SINGLE-WALLED  CARBON NANOTUBE USING NONLOCAL ELASTIC BEAM THEORY “, International Journal of Nanoscience, Vol. 10, No. 3, pp. 447-453, 2011.
  2. P. Soltani, M. P Bahar, A. Farshidianfar, ” An efficient GDQ model for vibration analysis of a multiwall carbon nanotube on Pasternak foundationwith general boundary conditions“, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 225, No. 10, pp. 1730-1741, 2011.
  3. P. Soltani, J. Saberian, R. Bahramian , A. Farshidianfar, ” Nonlinear free and forced vibration analysis of a single-walled carbon nanotube using shell model “, International Journal of Fundamental Sciences, IJFPS,Vol. 1, No. 3, pp. 47-52, Sep 2011.
  4. A. Farshidianfar, P. Soltani, ” Nonlinear flow-induced vibration of a SWCNT with a geometrical imperfection“, Computational Materials Science, Vol. 53, No. 1, pp. 105–116, Feb 2012.
  5. Payam Soltani, Omid Pashaei, Mohammad Mehdi Taherian, Anoushiravan Farshidianfar, ” Free Vibration of a Carbon Nanotube-based Mass Sensor“, Advanced Materials Research, Vols. 403-408, pp 1163-1167, Jan 2012.
  6. A. Farshidianfar, A. Saghafi, S.M. Kalami, I. Saghafi, ” Active vibration isolation of machinery and sensitive equipment using H∞ control criterion and particle swarm optimization method “, Meccanica, Vol. 47, No. 2, pp. 437–453, Feb 2012.
  7. Payam Soltani, D.D. Ganji, I. Mehdipour, A. Farshidianfar, ” Nonlinear vibration and rippling instability for embedded carbon nanotubes“, Journal of Mechanical Science and Technology (JMST), 26 (4), pp 985-992, 2012.
  8. P. Soltani, A. Farshidianfar, “Periodic solution for nonlinear vibration of a fluid-conveying carbon nanotube, based on the nonlocal continuum theory by energy balance method“, Applied Mathematical Modelling, Vol. 36, Issue 8, pp. 3712–3724, Aug. 2012.
  9. A. Farshidianfar and S. Soheili, “OPTIMIZED TUNED LIQUID COLUMN DAMPERS FOR EARTHQUAKE OSCILLATIONS OF HIGH-RISE STRUCTURES INCLUDING SOIL EFFECTS”, International Journal of Optimization in Civil Engineering, Vol. 2 , No.2, 221-234, May. 2012.
  10. Afsharfard, A. and A. Farshidianfar, “An efficient method to solve the strongly coupled nonlinear differential equations of impact dampers.” Archive of Applied Mechanics, Vol. 82, No.7, pp. 977-984, 2012.
  11. Shahab Ilbeigi, Javad Jahanpour and Anooshiravan Farshidianfar, “A novel scheme for nonlinear displacement-dependent dampers”, Nonlinear Dynamics, DOI 10.1007/s11071-012- 0465-4, Vol., No., pp., Sep. 2012.
  12. P. Soltani, O. Pashaei Narenjbon, M.M. Taherian, and A. Farshidianfar, ” An efficient continuum model for CNTs-based bio-sensors “, The European Physical Journal Applied Physics, Vol. 59, Issue 01, 10403, pp. 1-10, July 2012.
  13. Anooshiravan Farshidianfar, Pouria Oliazadeh, “Free Vibration Analysis of Circular Cylindrical Shells: Comparison of Different Shell Theories”, International Journal of Mechanics and Applications, Vol. 2, No.5, pp. 74-80, Sep. 2012.
  14. A. Farshidianfar and N. Dolatabadi, “A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator”, Iranian Journal of Mechanical Engineering, Transactions of the ISME, Vol. 12 , No.2, pp. 54-72, Sep. 2011.
  15. Afsharfard, A. and A. Farshidianfar, “Design of nonlinear impact dampers based on acoustic and damping behavior” International Journal of Mechanical Sciences, Vol. 65, Issue 01, pp. 125-133, December 2012.
  1. Payam Soltani, Amir Kassaei, Mohammad Mehdi Taherian, and Anooshiravan Farshidianfar, ” Vibration of wavy single-walled carbon nanotubes based on nonlocal Euler Bernoulli and Timoshenko models “, International Journal of Advanced Structural Engineering, Vol. 04, Issue 03, pp. 1-10, October 2012.
  2. Hamid Moeenfard, Mohammad Taghi Ahmadian and Anooshiravan Farshidianfar, “Modeling squeezed film air damping in torsional micromirrors using extended Kantorovich method”, Meccanica, DOI 10.1007/s11012-012-9632-4, Vol. 48, Issue 4, pp. 791-805, May 2013.
  3. A. Farshidianfar and N. Dolatabadi, “Modified higher-order wake oscillator model for vortex-induced vibration of circular cylinders”, Acta Mechanica, Vol. 224, No.7, pp. 1441– 1456, July 2013.
  4. Anooshiravan Farshidianfar and Saeed Soheili, “Ant colony optimization of tuned mass dampers for earthquake oscillations of high-rise structures including soil–structure interaction”, Soil Dynamics and Earthquake Engineering, Vol. 51, pp. 14-22, August 2013.
  5. Aref Afsharfard and Anooshiravan Farshidianfar, “Free vibration analysis of nonlinear resilient impact Dampers”, Nonlinear Dynamics, DOI 10.1007/s11071-013-0775-1, Vol. 73, No. 1-2, pp. 155-166, July 2013.
  6. A. Farshidianfar and S. Soheili, “Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique”, Iranian Journal of Mechanical Engineering, Transactions of the ISME, Vol. 13 , No.1, pp. 36-51, March 2012.
  7. A. Farshidianfar and S. Soheili, “OPTIMIZATION OF TMD PARAMETERS FOR EARTHQUAKE VIBRATIONS OF TALL BUILDINGS INCLUDING SOIL STRUCTURE INTERACTION”, International Journal of Optimization in Civil Engineering, Vol. 3 , No.3, pp. 409-429, July 2013.
  1. A. Afsharfard, and A. Farshidianfar, “An efficient concept for non-dimensionalizing the Duffing equations based on the parameterized perturbation method”, Scientia Iranica, Transaction B: Mechanical Engineering, Vol. 20, No. 5, pp. 1455-1463, 2013.
  2. Pouria Oliazadeh, Mohammad H. Farshidianfar and Anooshiravan Farshidianfar, “Exact analysis of resonance frequency and mode shapes of isotropic and laminated composite cylindrical shells; Part I: analytical studies”, Journal of Mechanical Science and Technology 27 (12), pp. 3635~3643, 2013.
  3. Pouria Oliazadeh, Mohammad H. Farshidianfar and Anooshiravan Farshidianfar, “Exact analysis of resonance frequency and mode shapes of isotropic and laminated composite cylindrical shells; Part II: Parametric studies”, Journal of Mechanical Science and Technology Vol. 27 , No. 12, pp. 3645-3649, 2013.
  4. B. Noori and A. Farshidianfar, “Optimum design of dynamic vibration absorbers for a beam, based on H ∞ and H2 Optimization.” Archive of Applied Mechanics, Vol. 83, No.12,1773–1787, 2013.
  5. Anooshiravan Farshidianfar and Saeed Soheili, “ABC optimization of TMD parameters for tall buildings with soil structure interaction”, Interaction and Multiscale Mechanics: an International Journal (IMMIJ), Vol. 6, No. 4, pp. 339-356, December 2013.
  6. Aref Afsharfard and Anooshiravan Farshidianfar, “Modeling and analysis of magnetorheological inner mass single unit impact dampers”, Journal of Intelligent Material Systems and Structures, Vol. 25, No. 3, pp. 342-351, 2014.
  7. A. Farshidianfar and A. Saghafi, “Global bifurcation and chaos analysis in nonlinear vibration of spur gear systems”, Nonlinear Dynamics, DOI 10.1007/s11071-013-1104-4, Vol. 75, No. 4, pp. 783-806, March 2014.
  8. Mohammad H. Farshidianfar, Anooshiravan Farshidianfar, Mahdi Mazloom Moghadam, ” Mode Count and Modal Density of Isotropic Circular Cylindrical Shells Using a Modified Wavenumber Space Integration Method “, Journal of Vibration and Acoustics, Vol. 136, Issue 4, pp 041004-1 -041004-13, AUGUST 2014.
  1. Anooshirvan Farshidianfar and Amin Saghafi, “Bifurcation and Chaos Prediction in Nonlinear Gear Systems”, Shock and Vibration, Volume 2014, Article ID 809739, pp. 1-8, May 2014.
  2. Aref Afsharfard and Anooshiravan Farshidianfar, “Finding the buckling load of non- uniform columns using the iteration perturbation method”, THEORETICAL & APPLIED MECHANICS LETTERS 4, 041011 (2014), [Vol. 4, No. 4, pp. 041011-1-041011-6, 2014].
  3. Aref Afsharfard and Anooshiravan Farshidianfar, “Application of single unit impact dampers to harvest energy and suppress vibrations”, Journal of Intelligent Material Systems and Structures, Vol. 25, No. 14, pp. 1850–1860, 2014.
  4. M. Akbarzade and A. Farshidianfar, “APPLICATION OF THE AMPLITUDE- FREQUENCY FORMULATION TO A NONLINEAR VIBRATION SYSTEM TYPIFIED BY A MASS ATTACHED TO A STRETCHED WIRE”, International Applied Mechanics, Vol. 50, No. 4, July, 2014, pp.476-483.
  1. Benyamin Gholami Bazehhour, Seyed Mahmoud Mousavi, and Anoushiravan Farshidianfar, “Free vibration of high-speed rotating Timoshenko shaft with various boundary conditions: effect of centrifugally induced axial force.” Archive of Applied Mechanics, Volume 84, Issue 12, pp. 1691-1700, December 2014.
  2. A. Farshidianfar and A. Saghafi, “Identification and control of chaos in nonlinear gear dynamic systems using Melnikov analysis”, Physics Letters A, Volume 378, Issue 46, pp. 3457–3463, 24 October 2014.
  3. A. Saghafi, and A. Farshidianfar, “An analytical study of controlling chaotic dynamics in a spur gear system”, Mechanism and Machine Theory, Volume 96, Issue 1, pp. 179–191, February 2016.
  4. Y. Vaghei, and A. Farshidianfar, “Trajectory tracking of under-actuated nonlinear dynamic robots: Adaptive fuzzy hierarchical terminal sliding-mode control”, Journal of AI and Data Mining, Vol 4, No 1, pp. 93-102, February 2016.
  5. Pouria Oliazadeh, Anooshiravan Farshidianfar, “Analysis of different techniques to improve sound transmission loss in cylindrical shells “, Journal of Sound and Vibration (JSV), Vol. 389, Issue C, pp 276-291, Jan. 2017.
  6. M. Akbarzade, A. Farshidianfar, ” Nonlinear transversely vibrating beams by the improved energy balance method and the global residue harmonic balance method “, Applied Mathematical Modelling, Vol. 45, Pages 393–404, May 2017.
  7. M. Akbarzade, A. Farshidianfar and M. Tahani, “Nonlinear free and forced vibrations of curved single-walled carbon nanotube on a Pasternak elastic foundation”, Scientia Iranica, Transaction F: Nanotechnology, Vol. 23, No. 6, pp. 3087-3098, 2016.
  8. M. Akbarzade, and A. Farshidianfar, “A Comparison between Energy Balance Method and Coupled Homotopy-Variational Approach to a Nonlinear Free Vibration of a System with Inertia and Static Type Cubic Nonlinearity”, Romanian Journal of Acoustics and Vibration [RJAV], Vol XIII, Issue 2, 125-130, 2016.
  9. M. Akbarzade, and A. Farshidianfar, “Analytic Solution of Transversal Oscillation of Quintic Non-Linear Beam with Energy Balance Method and Global Residue Harmonic Balance Method”, Moscow University Physics Bulletin, Theoretical, Mathematical & Computational Physics, Vol. 72, No. 2, pp. 157–162, 2017.
  10. M. Akbarzade, and A. Farshidianfar, “NONLINEAR DYNAMIC ANALYSIS OF AN ELASTICALLY RESTRAINED CANTILEVER TAPERED BEAM”, Journal of Applied Mechanics and Technical Physics, Vol. 58, No. 3, pp. 556–565, May 2017.
  1. Ali Ajilian Momtaz, Mohamadreza Akhavan Abdollahian, Anooshiravan Farshidianfar, “Study of wind-induced vibrations in tall buildings with tuned mass dampers taking into account vortices effects“, International Journal of Advanced Structural Engineering, Vol. 9, Issue 4, pp. 385–395, December 2017.
  1. Seyedeh Fatemeh Nabavi, Anooshiravan. Farshidianfar, and Aref Afsharfard “Novel piezoelectric-based ocean wave energy harvesting from offshore buoys”, Applied Ocean Research, Vol. 76, pp. 174–183, July 2018.
  2. Pouria Oliazadeh, Anooshiravan Farshidianfar, Malcolm J. Crocker, “Experimental and analytical investigation on sound transmission loss of cylindrical shells with absorbing material “, Journal of Sound and Vibration (JSV), Vol. 434, pp 28-43, Nov. 2018.
  3. Pouria Oliazadeh, Anooshiravan Farshidianfar, Malcolm J. Crocker ,” Study of sound transmission through single- and double-walled plates with absorbing material: Experimental and analytical investigation “, Applied Acoustics, Vol. 145, pp 7-24, February 2019.
  4. Seyedeh Fatemeh Nabavi, Anooshiravan. Farshidianfar, Aref Afsharfard, and Hamed Haddad Khodaparast “An ocean wave-based piezoelectric energy harvesting system using breaking wave force”, International Journal of Mechanical Sciences, Vol. 151, pp. 498–507, Jan. 2019.
  5. Hossein Safaeifar, Anooshiravan. Farshidianfar, “A new model of the contact force for the collision between two solid bodies “, Multibody System Dynamics,Vol. , pp. 2020.
  6. Seyedeh Fatemeh Nabavi, Mohammad Hossein Farshidianfar, Anooshiravan. Farshidianfar, Behrooz Beidokhti, “Physical-based methodology for prediction of weld bead characteristics in the Laser Edge Welding process”, Optik, Vol. 241, pp. 166917, 2021.
  7. M. Aliabadi, H. Ghorashi, Sh. Sh. Motlagh, S. F. Nabavi, S. A. Pakzad, M. H. Farshidianfar, A. Farshidianfar, F. Mahmoudi, A. Akbarzadeh, “Bispacer Multi-Stage Direct Contact Membrane Distillation System: Analytical and Experimental Study,” Processes, vol. 9, pp. 1297, 2021.
  8. H. Safaeifar, A. Farshidianfar, “Experimental and analytical investigation of impact dampers in free vibration reduction with coulomb friction,” Noise & Vibration Worldwide, Vol. 0, pp. 1-13, 2021.
  9. P. Oliazadeh, A. Farshidianfar, M. J. Crocker, “Experimental study and analytical modeling of sound transmission through honeycomb sandwich panels using SEA method,” Composite Structures, Vol. 280, pp. 114927, 2022.
  10. S. F. Nabavi, M. H. Farshidianfar, A. Farshidianfar, S. Marandi, “Dross Formation Modeling in the Laser Beam Cutting Process using Energy-based and Gas-based Parameters, ” The International Journal of Advanced Manufacturing Technology, vol. 120, pp. 8169-8184, 2022.
  11. S. F. Nabavi, A. Farshidianfar, and H. Dalir, “A comprehensive review on recent laser beam welding process: geometrical, metallurgical, and mechanical characteristic modeling” The International Journal of Advanced Manufacturing Technology, Vol. 129, pp. 4781-4828, 2023.
  12. S. F. Nabavi, A. Farshidianfar, and H. Dalir, “A comprehensive model of geometrical, metallurgical, and mechanical characteristics of laser beam welding process” The International Journal of Advanced Manufacturing Technology, vol. 129, pp. 1965-1984, 2023.
  13. Hamed Hamedi, Behnaz Setayeshfar, Mohamad Sadat, Anooshirvan Farshidianfar, Ali Mahvan, Maedeh Asadi, “Experimental and numerical analysis of the thermo-hydraulic performance of a cross-flow air-to-gas capsule-type plate heat exchanger”, Applied Thermal Engineering, Volume 236, Part D, 121900, January 2024.
  14. S. F. Nabavi, A. Farshidianfar, and H. Dalir, “An Applicable Review on Recent Laser Beam Cutting Process Characteristics Modelling: Geometrical, Metallurgical, Mechanical, and Defect” The International Journal of Advanced Manufacturing Technology, Vol. 130, pp. 2159- 2217, 2024..
  15. Shahin Sanati, Seyedeh Fatemeh Nabavi, Reihaneh Esmaili, Anooshiravan Farshidianfar, Hamid Dalir, “A Comprehensive Analysis of Laser Wobble Welding Process: Processing Parameters and Practical Applications”, Lasers in Manufacturing and Materials Processing, Vol. 11, pp. 492-528,, 05 February 2024.
  16. Seyedeh Fatemeh Nabavi, Hamid Dalir, and Anooshiravan Farshidianfar “A Comprehensive Review of Recent Advances in Laser Powder Bed Fusion Characteristics Modeling:Metallurgical and Defects” The International Journal of Advanced Manufacturing Technology, Vol. 132, pp. 2233-2269, 2024.
  1. Amir Mohammad Sedighi, Seyedeh Fatemeh Nabavi, Anooshiravan Farshidianfar, “A Review on Effect of Cooling Rate on Metallurgical, Mechanical, Geometrical Characteristics and Defects of Laser Cladding Process”, Lasers in Manufacturing and Materials Processing, Vol. 11, pp. 677-742, 06 May, 2024.
  2. Shahin Sanati, Seyedeh Fatemeh Nabavi, Reihaneh Esmaili, Anooshiravan Farshidianfar, “Laser Wobble Welding Process: A Review on Metallurgical, Mechanical, and Geometrical Characteristics and Defects”, Lasers in Manufacturing and Materials Processing, Vol. 11, pp. 743-780, 07 May, 2024.
  3. Shahin Sanati, Seyedeh Fatemeh Nabavi, Anooshiravan Farshidianfar, “Laser wobble welding modeling process: A comprehensive review of fundamentals, methods, heating, and solidification modes”, Journal of Manufacturing Processes, Vol. 131, pp. 1703-1739, 09 October, 2024.
  4. Seyedeh Fatemeh Nabavi, Anooshiravan Farshidianfar, and Hamid Dalir, “Comprehensive Review: Advancements in Modeling Geometrical and Mechanical Characteristics of Laser Powder Bed Fusion Process” Optics and Laser Technology, Vol. 180, pp. 1-45, 111480, January 2025.

Selected Journal Papers (in Persian)

  1. M. H. Mahdavi, A. Farshidianfar, ” Modeling and vibration analysis of non-contact AFM micro-cantilever considering the effects of mass and rotary inertia of the tip “, Mechanical Engineering Journal, Vol. 9, No. 2, pp. 42-27, Jan. 2008.
  2. A. Farshidianfar, K. Kamli, ” Investigation of gear rattle problem in vehicle powertrain system using analytical and numerical techniques”, Modares Engineering Journal, No. 28, pp. 92-101, July 2008.
  3. M. Raghebi, A. Farshidianfar, ” Developing a method for detection of multiple open cracks in a Euler-Bernoulli Beam using frequencies of vibration “, Mechanical Engineering Journal, Vol. 10, No. 1, pp. 134-152, June. 2008.
  4. A. Farshidianfar, M. H. Mahdavi, H, Dalir, “Flexural Vibration of Atomic Force Microscope Cantilever with Dimensional Effects “, Amir Kabir Journal, No. 65, pp. 42-27, May 2009.
  5. A. Farshidianfar, S. F. Nabavi, “Review on acoustic energy harvesting, ” Iranian journal of mechanical engineering (ISME), vol. 25, pp. 9-22, 2016.
  6. S. F. Nabavi, A. Farshidianfar, and, A. Afsharfard “Review on piezoelectric based ocean wave energy harvesting, ” Iranian journal of mechanical engineering (ISME), vol. 28, pp. 49-61, 2019.
  7. S. F. Nabavi, A. Farshidianfar, and, M. H. Farshidianfar “Fundamental of Laser and its uses in industries, ” Iranian journal of mechanical engineering (ISME), vol. 28, pp. 61-71, 2020.
  8. M. H. Farshidianfar, S. F. Nabavi, S. F. Eshraghi, A. Farshidianfar, “Laser cladding in recent years, ” Iranian journal of mechanical engineering (ISME), vol. 30, pp. 69-77, 2021.
  9. A. Farhsidianfar, S. Marandi, M. H. Farshidinafr, S. F. Nabavi, “Investigation into Effective Parameters on the Kerf Width of Stainless Steel 316 with Analysis of Variance in Fiber Laser Cutting Process, ” Modares Mechanical Engineering, vol. 21, pp. 11-18, 2021.
  10. M. H. Farshidianfar, S. F. Eshraghi, S. F. Nabavi, A. Farshidianfar, “A review on the presence of lasers in the processes of coating, repair, and prototyping”, Metallurgical engineering, Vol. 24, pp. 325-342, 2022.

Selected Conference Papers – Refereed

  1. Farshidianfar, A., Ebrahimi, M, Bartlett, H, Moavenian, M., “Manufacturing Parameter Variation in Automotive Driveline“, Advanced Manufacturing Processes, System and Technologies International Conference, MEP Publication, Bradford University, Bradford, UK,143-152, 1999.
  2. Farshidianfar, A., Ebrahimi, M., Rahnejat, H. and Menday, M.T., , “Low-frequency torsional vibration of vehicular driveline systems in shuffle”, in Multi-body Dynamics: Monitoring and Simulation Techniques- II, H. Rahnejat et al. (Eds.), PEP Publications (IMechE), Bradford University, Bradford, UK, , pp. 269-282, June 2000.
  3. Farshidanfar, A., Ebrahimi, M., Bartlett , H., Moavenian , M., “Torsional Vibration of Vehicular Driveline (Application to Shuffle)”, 4th International and 8th Annual Mechanical Engineering Conference (ISME2000), pp. 121-131, May 2000.
  4. Farshidianfar, A., Ebrahimi, M., “Optimization of vehicle driveline vibrations using genetic algorithm (GA)“, the SAE Noise & Vibration Conference & Exposition, Traverse City, MI, USA, April 30 – May 3, 2001.
  5. Farshidanfar, A., Ebrahimi, M., “Frequency response of torsional vibration using distributed-lumped modeling technique”, 5th International and 9th Annual Mechanical Engineering Conference (ISME2002), Tehran, pp. 16-21, May 2002.
  6. Farshidanfar, A., Mazaheri, O. “Prediction of driveshaft resonant frequencies using the Transfer Matrix Method”, 7th International and 11th Annual Mechanical Engineering Conference, ISME (2003), Ferdowsi University of Mashhad, pp. 465-473, May 2003.
  7. Farshidanfar, A., Poorkhadem, N. H., “3D Topology Optimization using Evolutionary Structural Optimization (ESO)”, 19th Canadian Congress of Applied Mechanics, CANCAM 2003, The University of Calgary, Calgary, Alberta, Canada, June 01-05, 2003.
  8. Abdul-Ameer A. A., Farshidianfar, A., Ebrahimi, M., “Modelling and simulation of turning process”, Laser Metrology and Machine Performance VI (LAMDAMAP-2003), The University of Huddersfield, England, pp. 171-180, July 2003.
  9.     Dalir, H.,  Farshidanfar, A., “ FLEXURAL VIBRATION OF ROTATING SHAFTS BY FREQUENCY DOMAIN HYBRID MODELLING”, 8th International and 12th Annual Mechanical Engineering Conference, ISME (2004), Tarbiat Modarres University, Tehran, pp. 54, May 2004.
  1. Farshidanfar, A., Farshidianfar, K., “ PREDICTION OF DRIVESHAFT RESONANT FREQUENCIES USING THE TRANSFER MATRIX METHOD”, 11th International a Congress & Exhibition on Sound and Vibration (ICSV11), St. Petersburg, Russia, pp. 20, 5-8 July 2004.
  1. Farshidianfar, A., Khosrownejad, M., Jafarnejad, M., “Fuzzy distributed-lumped modeling with application on uncertain dynamic analysis of a power transmission system”, 5th Iranian Conference on Fuzzy Systems (ICFS2004), Tehran, pp. 90-100, September 2004.
  2. Dalir, H., Farshidanfar, A., Shayan Amin, S. “ Frequency Response of Longitudinal Vibration Using Distributed-Lumped Modelling Technique”, International Mechanical Engineering Conference, IMEC2004, Kuwait, pp. 837-848, December 2004.
  3. Farshidanfar, A., Abbasion., S., Rafsanjani, A., “Prediction of Optimum Punch-Die Clearance”, Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, December 12-15, 2005.
  4. Dalir, H., Akbari, J., Farshidanfar, A., Hatsuzawa, T. “ EFFECTS OF AXIAL LOAD ON WAVE PROPAGATION IN DOUBLE-WALLED CARBON NANOTUBES USED AS A FLEXIBLE TIP IN AFM”, 20th ASME Biennial Conference on Mechanical Vibration and Noise, DETC 2005-84549, Long Beach, CA, USA, September 24-28, 2005.
  1. Farshidanfar, A., Esfahani, R., “HYBRID MODELING FOR FLEXTURAL VIBRATION OF ROTATING SHAFT”, Paper No.02-038., International Conference on Modeling and Simulation, MS2006, Kuala Lumpur, Malaysia, 30-31, May 2006.
  1. Farshidanfar, A., Rafsanjani, A., Abbasion., S., “PREDICTION OF OPTIMUM PUNCH- DIE CLEARANCE BY MINIMIZING THE BURR HEIGHT”, Paper No. 109, International Conference on Modeling and Simulation, MS2006, Kuala Lumpur, Malaysia, 30-31 May 2006.
  1. Mahdavi, M. H., Farshidianfar, A., Dalir, H., Shayan amin, S., “HIGH FREQUENCY ANALYSIS   OF   A   NON-CONTACT   ATOMIC   FORCE   MICROSCOPY MICROCANTILEVER”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 77, May 2006.
  1. Esfahani, R., Farshidianfar, A., “Distributed-lumped analysis for bending critical speeds”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 69, May 2006.
  2. Dalir, H., Farshidianfar, A., Shayan amin, S., Mahdavi, M. H., “AN APPROACH TO THE ELASTIC COLUMN BUCKLING WITH ALLOWANCE FOR SHEAR DEFORMATION AND ROTARY INERTIA”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 67, May 2006.
  1. Soheili, S., Farshidianfar, A., “FLEXURAL VIBRATION OF ROTATING SHAFTS USING HYBRID MODELING”, 14th Annual (International) Mechanical Engineering Conference, ISME (2006), Isfahan University of Technology, Isfahan, Iran, pp. 75, May 2006.
  1. Abbasion., S., Farshidianfar, A., N. Irani, Bashari, M., “A Practical Method for Multi-Fault Diagnosis of Rolling Element Bearings using Discrete Wavelet Transform and Support Vector Machine”, International Mechanical Engineering Congress and Exposition, Proceedings of IMECE2006, November 5-10, 2006, Chicago, Illinois, USA.
  2. Rafsanjani, A., Abbasion., S., Farshidianfar, A., N. Irani, ” Prediction of Ductile Damage in Sheet Metal Blanking Process Including the Thermo Mechanical Coupling “, International Mechanical Engineering Congress and Exposition, Proceedings of IMECE2006, November 5- 10, 2006, Chicago, Illinois, USA.
  3. Mahdavi, M. H., Farshidianfar, A., Dalir, H., Tahani, M., “FREQUENCY ANALYSIS OF ATOMIC FORCE MICROSCOPY CANTILEVERS IN A DYNAMIC MODE CONSIDERING TIP MASS AND MOMENT OF INERTIA”,  The 3rd International Congress of Nanotechnology (ICNT 2006), October 30- November 2, 2006, San Francisco, USA.
  4. Shayan amin, S.,, Farshidianfar, A., Dalir, H., “TIMOSHENKO FREQUENCY ANALYSIS  OF  CARBON  NANOTUBES  USING  AS  FIBERS  IN  COMPOSITE MATERIALS “, The 3rd International Congress of Nanotechnology (ICNT 2006), October 30- November 2, 2006, San Francisco, USA.
  5. Rafsanjani, A., Moeenfard, H., Farshidianfar, A., Abbasion., S., “Investigation the effect of internal radial clearance on the nonlinear dynamic response of a balanced rotor supported by deep groove ball bearings“, 15th. Annual (International) Conference on Mechanical Engineering-ISME2007, Amirkabir University of Technology, Tehran, Iran, ISME2007-1013, pp. 99-100, May 15-17, 2007.
  6. Farshidianfar, A., Abbasion., S., Rafsanjani, A., “Prediction of Ductile Fracture in Sheet Metal Blanking Process Including Thermal Effects”, Tehran International Congress on Manufacturing Engineering (TICME2007), Tehran, Iran, December 10-13, 2007.
  7. Farshidianfar, A., M.S. Gholami., and P. Naeemi, “Vibration control in machine tools using time delay resonator absorber “, Tehran International Congress on Manufacturing Engineering (TICME2007), Tehran, Iran, December 10-13, 2007.
  8. Farshidianfar, A., Rafsanjani, A., Abbasion., S., Moeenfard, H.., “Dynamic Modeling of Chaotic Response of Bearing Systems due to Surface Defects“,16th. Annual (International) Conference on Mechanical Engineering-ISME2008, Shahid Bahonar University of Kerman, Iran,pp. 285-286, May 14-16, 2008.
  9. Tahani, M., Soheili S., M. Abachizadeh, Farshidianfar, A., “Rotors Frequency and Time Response of Torsional Vibration Using Hybrid Modeling”,16th. Annual (International) Conference on Mechanical Engineering-ISME2008, Shahid Bahonar University of Kerman, Iran,pp. 321-322, May 14-16, 2008.
  1. Farshidianfar, A., Nickmehr N., ” THE INCREMENTAL HARMINIC BALANCE METHOD  FOR  NONLINEAR  VIBRATION  OF  AN  IMPACT  OSCILLATOR”,  15th International Congress on Sound and Vibration, ISCV15, Daejeon, Korea, pp. 88, July 6-10, 2008.
  1. Farshidianfar, A., Maleki, V., ” NONLINEAR MODELING OF HYDRAULIC ENGINE MOUNTS USING COUPLED MOMENTUM EQUATIONS OF DECOUPLER AND INERTIA TRACK “, 15th International Congress on Sound and Vibration, ISCV15, Daejeon, Korea, pp. 162, July 6-10, 2008.
  1. Farshidianfar, A., Nickmehr, N., “The incremental harmonic balance method for nonlinear vibration of autonomous self-excited oscillators with impact dampers “, the 37th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2008, Shanghai, China, pp. 183, 26-29 October, 2008.
  2. Farshidianfar, A., Pouria Oliazadeh, Hamid Reza Farivar,“Optimal Parameter’s Design in Tuned Liquid Column Damper“, 17th. Annual (International) Conference on Mechanical Engineering-ISME2009, University of Tehran, Iran, pp. 171-172, May 19-21, 2009.
  3. Farshidianfar, A., Zanganeh, H., ” Prediction of lock-in range by spectral analysis, and analytical verification of the griffin plot “, 16th International Congress on Sound and Vibration, ISCV16, Krakow, Poland, pp. 85, July 5-9, 2009.
  4. Abolbashari, M., Farshidianfar, A., Soheili, S., “Flexural Vibration of Propeller Shafts Using Distributed Lumped Modeling Technique “, 16th International Congress on Sound and Vibration, ISCV16, Krakow, Poland, pp. 99, July 5-9, 2009.
  5. Soltani, P., Saadati, M. R., Farshidianfar, A., “Application of Generalized Quadrature Rule to Vibration of a Curved Carbon Nanotube on Elastic Foundation”, 16th International Congress on Sound and Vibration, ISCV16, Krakow, Poland, pp. 108, July 5-9, 2009.
  6. Soltani, P., Bahar, P., Farshidianfar, A., “Vibration of Short Carbon Nanotubes Using Generalized Differential Quadrature Rule “, 16th International Congress on Sound and Vibration, ISCV16, Krakow, Poland, pp. 136, July 5-9, 2009.
  7. Nosrati, A., Farshidianfar, A., “Analytical Approximations for Stick-Slip Vibration Amplitudes Based on a Discretization Method “, 16th International Congress on Sound and Vibration, ISCV16, Krakow, Poland, pp. 164, July 5-9, 2009.
  8. Farshidianfar, A., Hoseinzadeh, M. H., Raghebi, M., “Damage Detection of an Overhang Cracked Shaft by Frequency Analysis “, 16th International Congress on Sound and Vibration, ISCV16, Krakow, Poland, pp. 57, July 5-9, 2009.
  9. Farshidianfar, A., Oliazadeh, P., ” Closed form optimal solution of a tuned liquid column damper responding to earthquake “, World Academy of Science, Engineering and Technology 59, WCSET 2009, ISSN 2070-3740, Bali, Indonesia, pp. 159-164, November 25- 27, 2009.
  1. Payam Soltani, Mohammad Reza Saadati, Anooshiravan Farshidianfar, ” In-plane Vibrational Analysis of the Circularly Curved Carbon Nanotubes in Pasternak-Winkler Type Foundation“, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, pp. 1-6, May 11-13, 2010.
  2. Payam Soltani, Hadi Ahmadi Dastjerdi, Anooshiravan Farshidianfar, ” Thermo- mechanical Vibration of a Single-walled Carbon Nanotube Embedded in a Pasternak Medium Based on Nonlocal Elasticity Theory “, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, pp. 1-5, May 11-13, 2010.
  3. Saeed Soheili, Mahdi Abachizadeh, Anooshiravan Farshidianfar, ” Tuned Mass Dampers for Earthquake Oscillations of High-rise Structures Using Ant Colony Optimization Technique “, 18th Annual International Conference on Mechanical Engineering-ISME2010, Sharif University of Technology, Tehran, Iran, pp. 1-6, May 11-13, 2010.
  1. Farshidianfar, A., Oliazadeh, P., ” Vibration Control of Super Tall Buildings by Tuned Liquid column damper “, World Academy of Science, 17th International Congress on Sound and Vibration, ISCV17, Cairo, Egypt, pp. 1-8, July 18-22, 2010.
  2. Anooshiravan Farshidianfar, Saeed Soheili, “Tuned Liquid Column Dampers with Period Adjustment Equipment for Earthquake Vibrations of High-rise Structures “, 6th National Congress on Civil Engineering, 6NCCE, Semnan University, Semnan, Iran, pp. 1-8, April 26-27, 2011.
  3. Anooshiravan Farshidianfar, Saeed Soheili, “Bee Colony Optimization of Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings Including Soil Structure Interaction “, 6th National Congress on Civil Engineering, 6NCCE, Semnan University, Semnan, Iran, pp. 1-8, April 26-27, 2011.
  4. Anooshiravan Farshidianfar, Ali A. Ghassabi, Mohammad H. Farshidianfar, and Mohammad Hoseinzadeh, ” VIBRATION ANALYSIS OF DRUG DELIVERY CNTS USING TRANSFER MATRIX METHOD “, Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2011, Edmonton, Alberta, CANADA, pp. 1-8, June 19-22, 2011.
  1. Anooshiravan Farshidianfar, Mohammad H. Farshidianfar, ” Free Vibration of Thin-Walled Cylindrical Shells “, 19th Annual International Conference on Mechanical Engineering-ISME2011, The University of Birjand, Birjand, Iran, pp. 1-4, May 10-12, 2011.
  2. Anooshiravan Farshidianfar, Saeed Soheili, ” Tuned Liquid Column Dampers for Earthquake Oscillations of High-rise Structures Including Soil-Structure Interaction“, 19th Annual International Conference on Mechanical Engineering-ISME2011, The University of Birjand, Birjand, Iran, pp. 1-4, May 10-12, 2011.
  3. Omid Jahanian, Anooshiravan Farshidianfar, Ghasem Karimi, ” An Investigation on Ground Reaction Force During Biped Normal Walking “, 19th Annual International Conference on Mechanical Engineering-ISME2011, The University of Birjand, Birjand, Iran,
  4. 1-4, May 10-12, 2011.
  5.                           Hamid Moeenfard,  Mohammad  Taghi  Ahmadian, Anooshiravan  Farshidianfar, “ANALYTICAL MODELING OF SQUEEZE FILM DAMPING IN MICROMIRRORS”, ASME International Design Engineering Technical Conference, DETC2011-47125, Washington DC, USA, pp. 1-7, August 28-31, 2011.
  1. Anooshiravan Farshidianfar, Ali. A. Ghassabi, Mohammad. H. Farshidianfar, “Transverse vibration of fluid conveying carbon nanotubes embedded in two-parameter elastic medium “, 18th International Congress on Sound and Vibration, ICSV18, Rio de Janeiro, Brazil, pp. 1-8, 10-14 July 2011.
  2. Payam Soltani, Amir Kassaei, Mohammad M. Taherian, Anooshiravan Farshidianfar, “VIBRATION ANALYSIS OF CURVED SINGLE-WALLED CARBON NANOTUBES  EMBEDDED  IN  AN  ELASTIC  MEDIUM  BASED  ON  NONLOCAL ELASTICITY “, 18th International Congress on Sound and Vibration, ICSV18, Rio de Janeiro, Brazil, pp. 1-8, 10-14 July 2011.
  1. Payam Soltani, Roja Bahramian, Javad Saberian, Anooshiravan Farshidianfar, “FREE VIBRATION OF AN EMBEDDED FLUID-FILLED SINGLE WALLED CARBON NANOTUBE UNDER AXIAL LOAD USING SHELL CONTINUUM MODEL “, 18th International Congress on Sound and Vibration, ICSV18, Rio de Janeiro, Brazil, pp. 1-8, 10-14 July 2011.
  1. Farzaneh Samadi, Anooshiravan Farshidianfar, “Free vibration of carbon nanotubes conveying viscous fluid using nonlocal Timoshenko beam model “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-7, 21-22 Dec. 2011.
  1. Farzaneh Samadi, Anooshiravan Farshidianfar, ” Vibration and instability analysis of viscoelastic single- walled carbon nanotubes conveying viscous fluid embedded in a viscoelastic medium “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  2. Aref Afsharfard, Anooshiravan Farshidianfar, ” Design of Nonlinear Impact Dampers Based on Acoustic Behavior “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  3. Anooshiravan Farshidianfar, Nader Dolatabadi, Yousef Naranjani, “Consideration of Lock-in Using a Modified Wake Oscillator in Vortex Induced Vibrations about a Cylinder “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  4. Anooshiravan Farshidianfar, Mehrdad Noei Aghaee, “Analytical Approaches for Friction Induced Vibration and Stability Analysis “, 1st International Conference on Acoustics & Vibration (ISAV2011), Tehran, Iran, , pp. 1-8, 21-22 Dec. 2011.
  5. Anooshiravan Farshidianfar, Ali. A. Ghassabi, Fatemeh. Tavakolian, ” The Thermal Effect on Pull-in Instability of Electrostatically Actuated Nanoswitches“, Proceedings of the 4th International Conference on Nanostructures (ICNS4), Kish Island, I.R. Iran pp. 1-3, 12-14 March, 2012.
  6. S. F. Nabavi, A. Farshidianfar, “Analysis of low frequency acoustic energy harvesting, combination of quarterwavlength resonator and piezoelectric beam, ” The 6th International Conference on Acoustics and Vibration, Tehran, 2016.
  7. S. F. Nabavi, A. Farshidianfar, and A. Afsharfard, “Different types of theoretical methods for small beam-column mass guided energy harvesting system,” The 8th international Conference on Acoustics and Vibration, Tehran, 2018.
  8. S. Marandi, S. F. Nabavi, M. H. Farshidianfar, A. Farshidianfar, J. Jahanpour, B. Beidokhti, M. Shojaati, “Experimental analysis of the physical parameter effect on the clad thickness of Steam Blade Turbine in laser cladding process,” The 17th National & 6th International Conference of Manufacturing Engineering, Tehran, 2021.
  9. R. Esmaili, S. F. Nabavi, M. H. Farshidianfar, A. Farshidianfar, “Effect of Wobble Mode on Geometric and Metallurgical Characteristics of Edge Joint on Laser Wobble Welding Process” 22th National Conference on Surface Engineering & 6th Conference on Laser Material Processing, 2022, Accepted as Poster.
  10. S. F. Eshraghi, S. F. Nabavi, M. H. Farshidianfar, and A. Farshidianfar, “Aluminum to copper dissimilar laser joint using stainless steel 316L bimetal,” The 30th Annual International Conference of Iranian Society of Mechanical Engineers, 10-20 May, 2022, Tehran, Iran.
  11. A. Sedighi, S. F. Nabavi, A. Farshidianfar, “Simulation of Laser Cladding Process: Temperature Analysis”, The 31th Annual International Conference of Iranian Society of Mechanical Engineers, 10-20 May, 2023, Tehran, Iran

Patents

1. S. F. Nabavi, A. Farshidianfar, and A. Afsharfard, “Tunable frequency buoy-based sea
waves energy harvester device”, Patent No. 139750140003003217, 2019.
2. A. Farshidianfar, M. Sasdat, A. Norouzi, “Optimized Plate of Plate Heat Exchanger PH063”, Patent No. 102732, 2020.
3. A. Farshidianfar, M. Sasdat, A. Norouzi, “Chevron Curved Plate Heat Exchanger”, Patent No. 102482, 2020.
4. A. Farshidianfar, M. H. Farshidianfar, S. H. Ghorashi, M. Aliabadi, S. Marandi, “Modular MDCMD”, Patent No. 103299, 2021.
5. A. Farshidianfar, M. H. Farshidianfar, S. H. Ghorashi, M. Aliabadi, Sh. Shokri, “Polymer Plate Heat Exchanger”, Patent No. 103844, 2021.
6. A. Farshidianfar, M. H. Farshidianfar, S. F. Nabavi, A. R. Farshidianfar, J. Jahanpour, and A. Khatibi, “High-speed Crack Detector of Formed and Flat Plates with Angled Arrays”, Patent No. 104838.
7. A. Farshidianfar, M. H. Farshidianfar, H. Ghorashi, S. F. Nabavi and M. Aliabadi, “Direct Contact Membrane Distillation”, US Patent NA0029-9911039.
8. A. Farshidianfar, M. H. Farshidianfar, S. F. Nabavi, “Laser Welding of Dissimilar Material Aluminium-Stainless Steel-Copper”, Patent No. 106692, 2022.
9. A. Farshidianfar, S. F. Nabavi, M. H. Farshidianfar “Integrated online monitoring and control of geometrical, metallurgical, mechanical characteristics and flaw properties from thermal material processing processes with automatic calibration capability”, Patent No. 108499, 2022.
10. A. Farshidianfar, S. F. Nabavi, M. H. Farshidianfar, S. Nejati, M. Molaee, M. Hajizadeh “Rotary Cutter of the Peltizer system using the Laser Direct Energy Additive Manufacturing”, Patent No.108969, 2023