Separation Systems
Get to know mist eliminators
Explore and compare
Vane type
Series of parallel corrugated plates manufactured from stainless steel, Thermal-Set Plastics and Fiber-Reinforced Plastic (FRP) materials.
Even due this type of separators is mostly common among steel manufacturing complexes there are less efficient in removing small droplets than other types.
Removable particle size above
10μm
Mesh type
A stream of steam or gas containing liquid droplets passes through the pads. Materials used are usually stainless steel and polymers.
Particles with high momentum deviate from the gas streamline and hit the fiber. Steam and gas pass freely through the meshes.
Removable particle size less
10μm
Cyclone type
This type is usually coming in a form of a hollow vessel with special inlet pipe that causes rotation in the gas flowing in and creating vortex.
Creating a vortex and separating waste solid or liquid particles from the gas flow with the particle inertia.
Removable particle size above
50μm
Taha TGS (Top Gas Scrubber)
Taha TGF (Top Gas Fuel) Demister
Taha PG (Process Gas) Demister
Taha REC (Recuperator bundle)
Taha CGS (Cooling Gas Scrubber)
Taha CG (Cooling Gas) Demister
Taha BS (Bottom Seal) Demister
Taha SGC (Seal Gas Cooler)
Taha SGAC (Seal Gas After Cooler)
Accessories for PHE
Oil cooler skid | Backflush system | Cleaning-in-place | Hydraulic wrench | Strainer | Taha_Glue | Tip
PHEs Spare parts
Gasket | Plate | Clamping Bolt | Frame and Accessories Guide Rod | Fixed Frame | Movable Frame
Why TGT separations
Customized design by the engineering department at TGT.
The exclusive and custom design of industrial mist eliminators tailored to the needs of the customer is carried out by the engineering department. Based on the process information, including temperature, pressure, maximum working flow, allowable pressure drops, the ratio of gas to liquid present in the process and the required separation efficiency, the design and sizing are carried out. Our mist eliminator designs are based on CFD simulation, experimental validation, and well-known standards in the industry to achieve an optimal design on efficiency and pressure drop. All designs are based on industry standards (including API, ASME, IPS, and GPSA).
Complete in-house production cycle
TGT stands as the sole company in Iran that encompasses the entire production cycle of cutting rotor from scratch to customer delivery within a single facility
Innovative optimized product and solutions
A mist eliminator designed with the Taha-SEP software, a specialized tool developed by TGT engineers for optimized design and sizing of two-phase separation systems.
